14 Technologies Flash Product Model Name 1.8” SATA SSD 3MR3-P 2.5" SATA SSD 3MR3-P 2.5” SATA SSD 3MR2-P 2.5" SATA SSD 3SR3-P Key Features 1. 1.8” SATA III solution for industrial field 2. iSMART disk health monitoring 3. Intelligent error recovery system 4. Excellent data transfer speed 5. Enhanced power cycling management 1. Compliant with MIL-STD-810-G 2. HW/SW Data Security (Quick Erase/Destroy/ Security Erase/ Write Protect) 3. iCell supported, 100% data protection 1. Compliant with MIL-STD-810-G 2. Data security (Quick Erase/Secure Erase/ Destroy/Write Protect) 3. High random performance 4. iData Guard/iCell technology for data protection 1. Compliant with MIL-STD-810-G 2. HW/SW Data Security (Quick Erase/ Destroy/ Security Erase/ Write Protect) 3. iCell supported, 100% data protection Interface SATA III 6Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type MLC MLC MLC SLC Capacity 8GB - 512GB 64GB~512GB 8GB - 1TB 8GB~512GB Max. Channel 4 4 4 4 SequentialR/W(MB/sec,max.) 480/220 490/270 520/450 490/280 Max. Power consumption 1.7W (5V x 340mA) 4.5W (5V x 900mA) 6W (5V x 1.2mA) 2.65W (5V x 530mA) Thermal Sensor STD: N W/T: Y Y STD: N W/T: Y External DRAM Buffer Y Y Y Y iData Guard Y Y Y Y iCell N Y Y Y TRIM Y Y Y Y ATA Security Y Y Y Y S.M.A.R.T Y Y Y Y iSecurity Y Y Y Y Dimension (WxLxH/mm) 54.0 x 78.5 x 5.0 69.8 x 99.8 x 9.2 69.8 x 100.1 x 6.9 69.8 x 99.8 x 9.2 Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55°C ~ +95°C MTBF: >3 million hours Standard temp. OP(0°C~+70°C) DRS18-XXXD70%C*** DRS25-XXXD70%C*** DRS25-XXXD81%C***P DRS25-XXXD70SC*** Wide temp. OP(-40°C~+85°C) DRS18-XXXD70%W*** DRS25-XXXD70%W*** DRS25-XXXD81%W***P DRS25-XXXD70SW*** Note XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12, 1TB=01T, 2TB=02T ) ***= flash configuration (internal control code) %=Flash Featured here are 4 of Innodisk’s advanced flash products for aerospace and defense applications. The iSecurity function under iSMART allows the user to easily operate the data erase command. The user may select the data erase function, monitor erase progress and also compare data before and after the erase. New circuit protection is dually designed to allow uninterrupted SSD functionality in an abnormal power supply situationas well as emergency startups or system shutdowns. Optimized power circuits and established OCP/OVP mechanisms prevents electronic components from burning out due to voltage and current surges. iSMART Power on Protection Stable Power Control Software Hardware Table of Contents