Product specifications are subject to change without prior notice. Model Name 1.8" SATA SSD 3MG2-P 1.8" SATA SSD 3MG3-P PATA 1MG3-P Slim SSD 3ME3 Slim SSD 3ME4 Key Features 1. Built-in DRAM buffer 2. Intelligent error recovery system 3. Excellent data transfer speed and high IOPS performance 4. iData Guard for abnormal power failure 1. Built-in DRAM buffer 2. Intelligent error recovery system 3. Excellent data transfer speed 4. iData Guard Protection 1. Built-in DRAM buffer 2. Intelligent error recovery system 3. Excellent data transfer speed 4. iData Guard Protection 1.8" housing, 50% space saving 1. 1.8" housing, 50% space saving 2.Exclusive L3 architecture 3. Designed with LDPC ECC engine Interface SATA III 6.0Gb/s SATA III 6.0Gb/s PIO Mode 0~4 Ultra DMA 0~5 SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type MLC MLC MLC MLC MLC Capacity 32GB-1TB 8GB~512GB 8GB~512GB 8GB~256GB 8GB~256GB Max. Channel 4 4 4 4 2 Sequential R/W (MB/sec, max.) 520/450 480/220 90/100 420/140 530/210 Max. Power Consumption 6W (5V x 1.2A) 1.7W (5V x 340 mA) 2W (5V x 400mA) 1.6W (5V x 315mA) 0.8W (5V x 160mA) Thermal Sensor Y STD : N , W/T : Y Y External DRAM Buffer Y Y Y Y Y iData Guard Y Y Y Y Y iCell N N N N N TRIM Y Y Y Y Y ATA Security Y Y Y Y Y S.M.A.R.T Y Y Y Y Y Dimension (WxLxH/mm) 54.0 x 78.5 x 5.0 54.0 x 78.5 x 5.0 69.85 x 99.85 x 9.2 69.85 x 50.0 x 9.0 69.85 x 50.0 x 9.0 Environment Vibration: 20G@7~2000Hz/Shock: 1500G@0.5ms/Storage Temperature: -55°C ~ +95°C/MTBF: >3 million hours Standard Temp. OP (0°C~+70°C) DGS18-XXXD81%C*** DGS18-XXXD70%C*** DGP25-XXXD70%C*** DEMLM-XXXD09%C*** DEMLM-XXXD08%C*** DEMLM-XXXM41%C*** WideTemp.OP (-40°C~+85°C) DGS18-XXXD81%W*** DGS18-XXXD70%W*** DGP25-XXXD70%W*** DEMLM-XXXD09%W*** DEMLM-XXXD08%W*** DEMLM-XXXM41%W*** Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12, 1TB=01T, 2TB=02T ) ***= flash configuration (internal control code) %=Flash Innodisk's R&D team has integrated iCell Technology into several SSD drives. iCell Technology ensures reliable and accurate data transfers, even in the event of an abnormal power failure. The iSecurity function under iSMART allows the user to easily operate the data erase command. The user may select the data erase function, monitor erase progress and also compare data before and after the erasure. SSDs are made up of millions of NAND flash cells. They can be written into groups called pages (generally 4KB in size) but can only be erased in larger groups called blocks (generally 128 pages or 512KB). The addresses of the deleted files, or HDD formats are sent along with the TRIM command to the SSD’s controller so the drive can function optimally. TRIM commands clean up garbage data on the SSD that can slow performance down. The TRIM command is generally sent from the OS when the system is idle. This cleans up the blocks with data that need to be erased so that the drive can perform like new. What is TRIM? What is iCell? What is iSecurity? Table of Contents