SSD Innodisk SSDs bring a whole new level of high performance to memory storage. Our wide selection of SSDs are designed for different applications, including industrial/embedded, enterprise server, aviation, defense, and other semi-industrial applications, such as thin clients, POS, and kiosk. Our SSDs come in iSLC, SLC and MLC types, and support PATA/IDE 44 pin, SATA II (3.0Gb/s), and SATA III (6.0Gb/s). Model Name 2.5" SATA SSD 3ME4 2.5" SATA SSD 3ME3 2.5" SATA SSD 3MG2-P 2.5" SATA SSD 3MR3-P Key Features 1. Exclusive L3 architecture 2. Designed with LDPC ECC engine 3. Excellent IOPS performance 1. High IOPS with DRAM-less design 2. 7mm height mechanical design 3. Low power consumption 1. EverGreen L² architecture 2. High Sequential/ IOPS performance 3. Support AES 4. iData Guard Protection 1. Compliant with MIL-STD-810-F/G 2. HW/SW Data Security (Quick Erase/ Destroy/ Security Erase/ Write Protect) 3. iCell supported, 100% data protection Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type MLC MLC MLC MLC Capacity 8GB-256GB 16GB-512GB 8GB~2TB 64GB~512GB Max. Channel 2 4 4 4 Sequential R/W (MB/sec, max.) 530/210 415/200 520/480 490/270 Max. Power Consumption 0.8W (5V x 160mA) 2.73W (5V x 545mA) 6W (5V x 1.2A) 4.5W (5V x 900mA) Thermal Sensor Y STD : N , W/T : Y Y STD : N , W/T : Y External DRAM Buffer N N Y Y iData Guard Y Y Y Y iCell N N Optional Y TRIM Y Y Y Y ATA Security Y Y Y Y S.M.A.R.T Y Y Y Y（support iSecurity) Dimension (WxLxH/mm) 69.8 x 100.1 x 6.9 69.8 x 100.1 x 6.9 69.8 x 100.1 x 6.9 69.8 x 100.0 x 9.5 (2TB) 69.8 x 99.8 x 9.2 Environment Vibration: 20G@7~2000Hz/Shock: 1500G@0.5ms/Storage Temperature: -55°C ~ +95°C/MTBF: >3 million hours StandardTemp.OP(0°C~+70°C) DES25-XXXM41%C*** DES25-xXXD09%C*** DES25-XXXD08%C*** DGS25-XXXD81%C***(P) DGS25-XXXD82%C***(P) DRS25-XXXD70%C*** WideTemp.OP(-40°C~+85°C) DES25-XXXM41%W*** DES25-XXXD09%W*** DES25-XXXD08%W*** DGS25-XXXD81%W***(P) DGS25-XXXD82%W***(P) DRS25-XXXD70%W*** Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12, 1TB=01T, 2TB=02T ) ***= flash configuration (internal control code) %=Flash Model Name 2.5" SATA SSD 3IE3 2.5 SATA SSD 3SE3 2.5" SATA SSD 3SR3-P 1.8" SATA SSD 3SE3-P Key Features 1.Cost-effective industrial Flash with iSLC 2. Lifespan 7 times longer than MLC 3. Performance and data quality congruent to SLC 1. Intelligent error recovery system 2. Excellent data transfer speed 3. iData Guard protection 1. Compliant with MIL-STD-810-F/G 2. HW/SW Data Security (Quick Erase/ Destroy/ Security Erase/ Write Protect) 3. iCell supported, 100% data protection 1. High quality SLC-based solution 2. Enhanced power cycling management 3. iSMART disk health monitoring Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type iSLC SLC SLC SLC Capacity 8GB~256GB 8GB~128GB 8GB~512GB 8GB-512GB Max. Channel 4 4 4 4 Sequential R/W (MB/sec, max.) 440/240 360/210 490/280 490/230 Max. Power Consumption 4.3W (5V x 870mA) 0.8W (5V x 160mA) 2.65W (5V x 530mA) 1.5 W (5V x 300 mA) Thermal Sensor STD : N , W/T : Y External DRAM Buffer N N Y Y iData Guard Y Y Y Y iCell N N Y N TRIM Y Y Y Y ATA Security Y Y Y Y S.M.A.R.T Y Y Y（support iSecurity) Y Dimension (WxLxH/mm) 69.8 x 100.1 x 6.9 69.8 x 99.8 x 9.2 69.8 x 99.8 x 9.2 54.0 x 78.5 x 5.0 Environment Vibration: 20G@7~2000Hz/Shock: 1500G@0.5ms/Storage Temperature: -55°C ~ +95°C/MTBF: >3 million hours StandardTemp.OP(0°C~+70°C) DHS25-XXXD08BC*** DES25-XXXD08SC*** DRS25-XXXD70SC*** DES18-XXXD70SC*** WideTemp.OP(-40°C~+85°C) DHS25-XXXD08BW*** DES25-XXXD08SW*** DRS25-XXXD70SW*** DES18-XXXD70SW*** Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12, 1TB=01T, 2TB=02T ) ***= flash configuration (internal control code) %=Flash Table of Contents