Product specifications are subject to change without prior notice. SATA Slim The Innodisk SATA Slim is compliant with the JEDEC SFF-8156 standard form factor and ATA protocol. It does not require drivers, and can be configured as a boot device or a data storage device. It is also suitable for portable/hand-held devices, thin clients, and industrial applications that require the effective reduction of operation system boot time and power consumption. With a 7+15 pin SATA interface, the Innodisk SATA Slim supports most platforms with a standard SATA port. Model Name SATA Slim 3IE3 SATA Slim 3SE3 SATA Slim 3MG2-P Key Features 1. Cost-effective industrial Flash with iSLC 2. Lifespan 7 times longer than MLC 3. Performance and data quality congruent to SLC 1. Half Slim, space saving 2. Compatible with JEDEC MO-297 3. Excellent data transfer speed and IOPS 1. EverGreen L² architecture 2. High Sequential/IOPS performance 3. Support AES 4. iData Guard protection Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type iSLC SLC MLC Capacity 8GB~128GB 8GB~128GB 8GB~256GB Max. Channel 4 4 4 SequentialR/W(MB/sec,max.) 440/220 370/220 520/290 Max. Power Consumption 1.6W (5V x 310mA) 2W (5V x 400mA) 2.6W (5V x 520mA) Thermal Sensor STD : N , W/T : Y Y External DRAM Buffer N N Y iData Guard Y Y Y iCell N N N TRIM Y Y Y ATA Security Y Y Y S.M.A.R.T Y Y Y Dimension (WxLxH/mm) 54.0 x 39.0 x 4.0 54.0 x 39.0 x 4.0 54.0 x 39.8 x 4.0 Environment Vibration: 20G@7~2000Hz/Shock: 1500G@0.5ms/Storage Temperature: -55°C ~ +95°C/MTBF: >3 million StandardTemp.OP (0°C~+70°C) DHSLM-XXXD08%C*** DESLM-XXXD08%C*** DGSLM-XXXD81%C*** WideTemp.OP (-40°C~+85°C) DHSLM-XXXD08%W*** DESLM-XXXD08%W*** DGSLM-XXXD81%W*** Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type Model Name SATA Slim 3ME3 SATA Slim 3ME4 Key Features 1. Half Slim, space saving 2. High random performance 3. Budget -friendly MLC-based solution 4. Compatible with JEDEC MO-297 1. Exclusive L3 architecture 2. Designed with LDPC ECC engine 3. Compatible with JEDEC MO-297 Interface SATA III 6.0Gb/s SATA III 6.0Gb/s Flash Type MLC MLC Capacity 8GB~256GB 8GB~256GB Max. Channel 4 2 Sequential R/W (MB/sec, max.) 420/140 530/210 Max. Power Consumption 1.6W (5V x 310mA) 0.8W (5V x 160mA) Thermal Sensor STD : N , W/T : Y Y External DRAM Buffer N N iData Guard Y Y iCell N N TRIM Y Y ATA Security Y Y S.M.A.R.T Y Y Dimension (WxLxH/mm) 54.0 x 39.0 x 4.0 54.0 x 39.0 x 4.0 Environment Vibration: 20G@7~2000Hz/Shock: 1500G@0.5ms/Storage Temperature: -55°C ~ +95°C/MTBF: >3 million Standard Temp. OP (0°C~+70°C) DESLM-XXXD09%C*** DESLM-XXXD08%C*** DESLM-XXXM41%C*** WideTemp.OP (-40°C~+85°C) DESLM-XXXD09%W*** DESLM-XXXD08%W*** DESLM-XXXM41%W*** Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type Table of Contents