Product specifications are subject to change without prior notice. Model Name Mini PCIeDOM 1SE Mini PCIeDOM 1ME3 Key Features 1. Standard Mini PCIe form factor 2. Driver-less 3. PCIe Gen.1x1 1. Standard Mini PCIe form factor 2. Driver-less 3. PCIe Gen.1x1 Interface PCI Express Gen.1x1 PCI Express Gen.1x1 Flash Type SLC MLC Capacity 4GB~64GB 8GB~256GB Max. Channel 4 2 Sequential R/W (MB/sec, max.) 85/85 130/100 Max. Power Consumption 2.3 W (3.3V x 700mA ) 2 W (3.3V x 620mA ) Thermal Sensor STD : N , W/T : Y External DRAM Buffer N N iData Guard Y Y iCell N N TRIM N N ATA Security Y Y S.M.A.R.T Y Y Dimension (WxLxH/mm) 30.0 x 50.95 x 5.0 30.0 x 50.9 x 5.0 Environment Shock: 1500G@0.5ms/Storage Temperature: -55°C ~ +95°C/MTBF: >3 million hours Standard Temp. OP (0°C~+70°C) DEEDM-XXXJ30AC*** DEEDM-XXXD09BC*** Wide Temp. OP (-40°C~+85°C) DEEDM-XXXJ30AW*** DEEDM-XXXD09BW*** Note XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type Mini PCIeDOM The Innodisk Mini PCIeDOM is a Flash based disk module with standard Mini PCIe form factor, and PCI Express Gen.1 interface. It is suitable for board maker or SI to design in the product as a boot drive or a storage device. Meanwhile, it supports multiple operating systems with no driver needed, including Windows XP, Windows 7, and Linux based OS. Model Name EDC 1SE Vertical Type EDC 1SE Horizontal Type EDC 1ME Vertical Type EDC 1ME Horizontal Type Key Features 1. Dust prevention 2. High quality SLC-based solution 1. High quality SLC-based solution 2. Supported mounting hole 1. Budget- friendly MLC-based solution 2. High performacne PATA solution 1. Budget- friendly MLC-based solution 2. High performacne PATA solution Connector 40/44 pin 40/44 pin 44 pin 44 pin Interface PATA PATA PATA PATA Flash Type SLC SLC MLC MLC Capacity 512MB~4GB 512MB~8GB 8GB~128GB 8GB~256GB Max. Channel 2 2 2 2 Sequential R/W (MB/sec, max.) 40/28 40/28 110/75 110/75 Max. Power Consumption 0.75W (5V x 150mA) 0.5W (3.3V x 150mA) 0.75W (5V x 150mA) 0.5W (3.3V x 150mA) 0.8W (5V x 160mA) 0.5W (3.3V x 160mA) 0.8W (5V x 160mA) 0.5W (3.3V x 160mA) Thermal Sensor N N N N External DRAM Buffer N N N N ATA Security Y Y Y Y S.M.A.R.T Y Y Y Y Dimension (WxLxH/mm) 40 pin: 60.2 x 27.3 x 6.4 44 pin: 50.3 x 27.3 x 5.8 40 pin (A,B type): 55 x 32.4 x 12.9 40 pin (C,D type): 55 x 32.4 x 14.6 40 pin (E,F type): 55 x 32.4 x 18.3 44 pin (A,B type): 48 x 32.6 x 6.7 44 pin (C,D type): 48 x 32.6 x 12.8 44 pin (E,F type): 48 x 32.6 x 12.9 50.3 x 27.3 x 7.5 A,B type: 48 x 32.6 x 7.3 Environment Vibration: 20G@7~2000Hz/Shock: 1500G@0.5ms/Storage Temperature: -55°C ~ +95°C/MTBF: >3 million hours Standard Temp. OP (0°C~+70°C) DE0H-XXXD41AC*** DE4H-XXXD41AC*** DE0P%-XXXD41AC*** DE4P%-XXXD41AC*** DEE4H-XXXD53BC*** DEE4%-XXXD53BC*** Wide Temp. OP (-40°C~+85°C) DE0H-XXXD41AW*** DE4H-XXXD41AW*** DE0P%-XXXD41AW*** DE4P%-XXXD41AW*** DEE4H-XXXD53BW*** DEE4%-XXXD53BW*** Note xxx = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28) ***= flash configuration (internal control code), %=Horizonyal type(A,B,C,D,E,F) EDC The Innodisk Embedded Disk Card (EDC) complies with PCMCIA* ATA standards and fits into all platforms with an IDE connector. The Innodisk Embedded Disk Card comes in capacities ranging from 512MB to 256GB and is available in 40-pin and 44-pin connector packages. Table of Contents