Product specifications are subject to change without prior notice. Communication The series aim to provide flexible connectivity and bandwidth to industrial systems. With our mPCIe GbE, CANBus and serial communication modules, users can expand the existing system to meet dynamic connectivity under IoT. We also provide an isolated option for each time. Model Name EMP2-X203 EMP2-X403 EMP2-X404 EMPL-G101 EMPL-G201 Module Type mPCIe to two RS-232 module mPCIe to four RS-232 module mPCIe to four RS-232/422/485 module mPCIe to single isolated GbE LAN module mPCIe to dual isolated GbE LAN module Key Features 1. PCI-Express specification Rev. 2.0 compliant 2. Up to 1 Mbps serial data rate. 16550 compatible 256-byte FIFOs 3. Industrial temperature (-40 ºC to 85 ºC) operation 4. Flexible design with DB-9 connectors and cable 5. ESD up to 15KV (Electrostatic Discharge) protection circuit to prevent system damage 6. Supports CTS/RTS hardware flow control 1. PCI-Express specification Rev. 2.0 compliant 2. Up to 1 Mbps serial data rate. 16550 compatible 256-byte FIFOs 3. Industrial temperature (-40 ºC to 85 ºC) operation 4. Flexible design with DB-9 connectors and cable 5. ESD up to 15KV (Electrostatic Discharge) protection circuit to prevent system damage 6. Supports CTS/RTS hardware flow control 1. PCIe 2.0 compliant. RS-232/ 422/485 mode configurable by software 2. Up to 25 Mbps serial data rate. 16C550 compatible. 256-byte FIFOs 3. Industrial temperature (-40 ºC to 85 ºC) operation 4. Full DB9 connector without daughter board, can avoid possible mechanical intervention 5. Termination resistor enabled/ disabled by DIP switch 6. RI/5V/12V output switched by jumper 7. ESD(Electrostatic Discharge) protection circuit to prevent system damage 1. Single isolated GbE LAN ports 2. Complies with EN61000-4-5 2kV surge protection 3. Complies with IEC 60950- 1:2005 + A1: 2009 + A2:2013 2kV HiPOT protection 4. Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV 5. Flexible daughter board with cable to fit into different system 6. Supports mounting terminal or bracket for daughter board 7. Optional industrial temperature(-40°C to +85°C) support 1. Dual isolated GbE LAN ports 2. Complies with EN61000-4-5 2kV surge protection 3. Complies with IEC 60950- 1:2005 + A1: 2009 + A2:2013 2kV HiPOT protection 4. Complies with EN61000- 4-2 (ESD) Air-15kV, Contact-8kV 5. Flexible daughter board with cable to fit into different system 6. Supports mounting terminal or bracket for daughter board 7. Optional industrial temperature (-40°C to +85°C) support Form-Factor mPCIe mPCIe mPCIe mPCIe mPCIe Input I/F PCI Express 2.0 PCI Express 2.0 PCI Express 2.0 PCI Express 2.1 PCI Express 2.1 Input Connector mPCIe mPCIe mPCIe mPCIe mPCIe Output I/F RS-232 x 2 RS-232 x 4 RS-232/422/485 x 4 GbE LAN x 1 GbE LAN x 2 Output Connector DB-9 x 2 DB-9 x 4 DB-9 x 4 RJ45 x 1 RJ45 x 2 Dimensions(W*L*H/mm) 30.0 x 50.9 x 6.7 30.0 x 50.9 x 6.7 30.0 x 50.9 x 8.0 30.0 x 50.9 x 7.6 30.0 x 50.9 x 7.6 Operating Temperature Wide temp : -40°~85°C Wide temp : -40°~85°C Wide temp : -40°~85°C STD temp : 0°~70°C Wide temp : -40°~85°C STD temp : 0°~70°C Wide temp : -40°~85°C Order Info. EMP2-X203-W1 EMP2-X403-W1 EMP2-X404-W1 EMPL-G101-C1 EMPL-G101-W1 EMPL-G101-C2(with bracket) EMPL-G101-W2 (with bracket) EMPL-G201-C1 EMPL-G201-W1 EMPL-G201-C2(with bracket) EMPL-G201-W2 (with bracket) Model Name EMUC-B201 EMU2-X2S1 EMU2-X1S1 Module Type USB to dual isolated CANbus 2.0B module USB to dual isolated RS-232 module USB to Single isolated RS-232 module Key Features 1. mPCIe form factor. Two channels CANbus 2.0B (DB-9 x 2) backward compatible with 2.0A 2. Complies with EN61000-4-5 2.5kV Surge protection 3. Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection 4. Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV 5. Supports -40 to +85 degrees 6. Supports 3rd mounting hole and USB Pin header for out-of-minicard installation 7. Supports baud rate 50/125/250/500/1000K 8. Termination resistor enabled/disabled by jumper 1. USB specification Rev. 2.0 compliant 2. Up to 1 Mbps serial data rate. 512-byte FIFOs 3. Full RS232 functions with DB9 connector 4. Supports port-to-port and port-to-computer isolation, complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection 5. Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV 6. Supports 3rd mounting hole and USB Pin header for out-of-minicard installation 7. Industrial temperature(-40 ºC to 85 ºC) operation 1. USB specification Rev. 2.0 compliant 2. Up to 1 Mbps serial data rate. 512-byte FIFOs 3. Full RS232 functions with DB9 connector 4. Supports port-to-port and port-to-computer isolation, complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection 5. Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV 6. Supports 3rd mounting hole and USB Pin header for out-of-minicard installation 7. Industrial temperature(-40 ºC to 85 ºC) operation Form-Factor mPCIe mPCIe mPCIe Input I/F USB 2.0 USB 2.0 USB 2.0 Input Connector mPCIe or 5Pin Header mPCIe or 5Pin Header mPCIe or 5Pin Header Output I/F CANbus 2.0B x 2 RS-232 x 2 RS-232 x 1 Output Connector DB-9 x 2 DB-9 x 2 DB-9 x 1 Dimensions(W*L*H/mm) 30.0 x 50.9 x 8.35 30.0 x 50.9 x 8.25 30.0 x 50.9 x 8.25 Operating Temperature Wide temp : -40°~85°C Wide temp : -40°~85°C Wide temp : -40°~85°C Order Info. EMUC-B201-W1 EMU2-X2S1-W1 EMU2-X1S1-W1 Table of Contents