l The Innodisk CFast is a small form factor card standard with high data storage capacity. It is suitable for semi-industrial applications. Compliant with the CFast 2.0 standard, it is designed with a 7+17 pin connector and is SATA compatible. The Innodisk CFast offers data transfer rates of sequential read up to 530 MB/sec and of sequential write up to 210MB/sec. CFast Model Name CFast 3SE3 CFast 3ME3 CFast 3ME4 CFast 3IE3 Key Features 1. Compliant with CFast 2.0 standard 2. Excellent IOPS performance 3. Supports hardware write protect 1. Compliant with CFast 2.0 satndard 2. Buget friendly MLC-based solution 3. Excellent IOPS performance 4. Supports hardware write protect 1. Exclusive L3 architecture 2. Designed with LDPC ECC engine 3. Excellent IOPS performance 4. Supports hardware write protect 1. Cost-effective industrial Flash with iSLC 2. Lifespan 7 times longer than MLC 3. Performance and data quality congruent to SLC 4. Supports hardware write protect Interface SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s SATA III 6.0Gb/s Connector 7pin+17pin 7+17pin 7pin+17pin 7+17pin Flash Type SLC MLC MLC MLC Capacity 4GB~64GB 8GB~256GB 8GB~256GB 8GB~128GB Max. Channel 4 2 2 2 Sequential R/W (MB/sec, max.) 330/180 220/130 530/210 240/160 Max. Power Consumption 1.1W (3.3V x 360mA) 1.5W (3.3V x 470mA) 1.3W (5V x 250mA) 1.5W (3.3V x 470mA) Thermal Sensor STD : N W/T : Y Y STD : N W/T : Y External DRAM Buffer N N N N iData Guard Y Y Y Y iCell N N N N TRIM Y Y Y Y ATA Security Y Y Y Y S.M.A.R.T Y Y Y Y Dimension (WxLxH/mm) 42.8 x 36.4 x 3.6 42.8 x 36.4 x 3.6 42.8 x 36.4 x 3.6 42.8 x 36.4 x 3.6 Environment Vibration: 20G@7~2000Hz/Shock: 1500G@0.5ms/Storage Temperature: -55°C ~ +95°C/MTBF: >3 million hours Standard Temp. OP (0°C~+70°C) DECFA-XXXD08SC*** DECFA-XXXD09BC*** DECFA-XXXM41BC*** DHCFA-XXXD09BC*** Wide Temp. OP (-40°C~+85°C) DECFA-XXXD08SW*** DECFA-XXXD09BW*** DECFA-XXXM41BW*** DHCFA-XXXD09BW*** Note xxx = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 ) ***= flash configuration (internal control code) %=Flash Type Model Name iCF 9000 iCF 1SE iCF 1ME Key Features 1. High sustained data transfer speed 2. Enhanced power cycling management High quality SLC-based solution 1. Budget friendly MLC-based solution 2. Enhanced power cycling management Interface PATA PATA PATA Connector 50pin CF connector 50pin CF connector 50pin CF connector Flash Type SLC SLC MLC Capacity 1GB~64GB 512MB~8GB 8GB~256GB Max. Channel 4 2 2 Sequential R/W (MB/sec, max.) 110/100 40/30 110/110 Max. Power Consumption 1.05W (5V x 210mA) 0.76W (3.3V x 230mA) 0.75W (5V x 150mA) 0.5W (3.3V x 150mA) 0.8W (5V x 160mA) 0.5W (3.3V x 160 mA) Thermal Sensor N N N ATA Security Y Y Y S.M.A.R.T Y Y Y Dimension (WxLxH/mm) 42.8 x 36.4 x 3.3 42.8 x 36.4 x 3.3 42.8 x 36.4 x 3.3 Environment Vibration: 20G@7~2000Hz/Shock: 1500G@0.5ms/Storage Temperature: -55°C ~ +95°C/MTBF: >3 million hours Standard Temp. OP (0°C~+70°C) DC1M-XXXD71AC*** DC1M-XXXD41AC*** DECFC-XXXD53BC*** Wide Temp. OP (-40°C~+85°C) DC1M-XXXD71AW*** DC1M-XXXD41AW*** DECFC-XXXD53BW*** Note PIO mode 0-6 UDMA mode 0-7 PIO mode 0-6 UDMA mode 0-4 PIO mode 0-6 UDMA mode 0-7 Notes XXX = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28) ***= flash configuration (internal control code) % =Flash Type CF Card Innodisk’s Industrial CompactFlash Memory Card (iCF) complies with the PCMCIA* ATA standard. Designed to replace traditional rotating disk drives, Innodisk iCFs are embedded solid-state data storage systems that are designed for mobile computing and the industrial work place. Table of Contents