The Power-Sure 700 combines voltage regulation with a transformer and filter to remove transients and noise. The combined effect is regulating and shielded isolation transformer/system that solves 99 percent of the electrical disturbance problems, including electrical brownouts, sags, surges, transients and other electrical disturbances.

The Eaton APR48-ES Energy Saver Rectifier is designed for communications network operators who are striving to cut energy costs across the network through greater operating efficiency, and/or to meet aggressive carbon footprint reduction targets.

Operating with over 96% efficiency, it produces at least 50% less waste energy than most other modern rectifiers, and with potentially greater savings over even older infrastructure.

The 2kW Energy Saver Rectifier is suitable for powering access applications within a telecom network such as cellular base stations, customer premises equipment and road-side cabinet installations.

The Power-Sure 700 Three Phase Power Line Conditioning system provides exceptional system reliability that can be attributed to MGE's microprocessor controlled zero-current cross tap switching technology. The Power-Sure 700 combines solid state, microprocessor based voltage regulation, with a multi-shield computer grade transformer and filter to remove transients and noise. The combined effect is a regulating and shielded isolation transformer/system that solves 99% of the electrical disturbance problems. The Power-Sure 700 protects your system against electrical brownouts, sags, surges, transients and other electrical disturbances. This power conditioner also provides the protection, efficiency, and reliability that are critical to every application with sensitive equipment.

Every facet of our daily life is being automated by faster microprocessors and microprocessor-based equipment which require steady continuous power. As market pressures force the deregulation of the electrical industry, utility companies have less and less control over the quality of power supplied to sensitive electronic equipment. In data processing and medical applications, the effects of unreliable power can be translated into incorrect data, lost memory, premature component failure, mixed and garbled data and inaccurate diagnostics. Power conditioning alleviates these problems. For this reason, the Power-Sure 800 was designed using a special high "K-Factor" transformer capable of handling these harmonics without overheating. The Power-Sure 800 has one of the highest "K-Factors" in the industry. Additionally, the Power-Sure 800 virtually eliminates any transient harmonics being reflected back onto the power lines, thus preventing damage to building wiring.

The Eaton NPR48 Series of rectifier modules is designed for a wide range of telecommunications applications including switching, wireless, and transmission.

The combination of leading high frequency switch mode technology with high reliability fan cooling makes the NPR48 a flexible, efficient, and reliable DC power source. It is designed for operation at up to 70 Degree C (158 Degree F) and under a wide range of AC power conditions.

The NPR48 Series rectifiers are up to 92 percent efficient with optimum performance available at typical load currents. These rectifiers also offer two output modes; either constant power or constant current.

Designed to operate with the SM60 or SM65 Series Supervisory Modules the NPR48 rectifier modules will provide years of cost-effective, and trouble free service for your network equipment.

The Power-Sure 700 combines voltage regulation with a transformer and filter to remove transients and noise. The combined effect is regulating and shielded isolation transformer/system that solves 99 percent of the electrical disturbance problems, including electrical brownouts, sags, surges, transients and other electrical disturbances.

The optional Battery Charger Module is designed to provide additional current for faster recharging of uninterruptible power system (UPS) battery modules in systems with many batteries.

Pulsar Maintenance bypass switch (MBS) is designed for Pulsar EX RT UPS, enables the user to continue supplying utility AC Power for the critical load while routing or emergency maintenance is being performed on the UPS. Thereby avoiding equipment downtime. MBS has Plug and line cord for all connections to AC utility, load and UPS.

The Eclipse product line brings affordable surge protection to your PC, peripherals and
other devices in the event of nearby lightning strikes, surges and spikes. In addition, Eclipse
provides line noise reduction to minimize interference from the utility power. All Eclipse models
include a load protected status LED to notify you in case of surge protection failure. On the
EclipsePro and ProTel models, an audible alarm provides warning in combination with the LED.
EclipsePro and ProTel models feature a ground OK LED to warn of building wiring faults
which can potentially interfere with Eclipse's ability to arrest surges and spikes.