General Information | |
Manufacturer | Comtrol Corporation |
Manufacturer Part Number | 32001-2 |
Manufacturer Website Address | http://www.comtrol.com |
Brand Name | Comtrol |
Product Name | RocketLinx Industrial Serial to Fiber Media Conversion Module |
Product Type | Transceiver/Media Converter |
Interfaces/Ports | |
Total Number of Ports | 2 |
Number of ST Ports | 1 |
Media & Performance | |
Maximum Distance Supported | 3.11 Mile |
Physical Characteristics | |
Form Factor | External |
Height | 1" |
Width | 3.8" |
Depth | 4.5" |
Weight (Approximate) | 5.12 oz |
Miscellaneous | |
Green Compliant | Yes |
Green Compliance Certificate/Authority | RoHS |
Warranty | |
Limited Warranty | 3 Year |
Mechanical | |
Dimensions: WxHxD (mm) | |
Mounting | Din Rail Mount; Wall Mount |
Enclosure | Metal |
Interface | |
Serial interface | RS232/RS422/RS485 |
Serial interface number of ports | 1 |
Serial Interface type of connector | Terminal Block |
Network interface | |
Network interface number of ports | 1 |
Network interface type of connector | |
Power | |
Power Input Type | Single DC / Terminal Block |
Operating Supply Voltage | 12 to 48 VDC |
Power Consumption | 65 mA @ 12V |
Reliability | |
Operating Temperature | |
Isolation Protection | Yes |
Surge Protection | - |
Standards and Certifications | Safety UL 60950-1, EN 60950-1, EMC CE, FCC, EMI EN 55022 Class A, FCC Part 15 Subpart B Class A, EMS EN 61000-4-2 ESD: contact 4 kV; air 8 kV, EN 61000-4-3 RS: 3 V/m (80 MHz to 1 GHz), EN 61000-4-4 EFT: Power 1 kV; Signal 0.5 kV, EN 61000-4-5 Surge: AC 1 kV, EN 61000-4-6 CS: 3 V, EN 61000-4-8, EN 61000-4-11, Marine DNV, Medical (NPort 5210 only), EN 60601-1-2 Class B, EN 55011 |
Multi-mode fiber optic ports meet the needs for long distance transmission up to 5KM. RocketLinx MC5001 will automatically detect the data baud rate of the connected full-duplex serial device, up to 921Kbps.
The RocketLinx MC5001 supports two transmission configurations, Peer-to-Peer in half/full-duplex and Serial Fiber Ring (SFR) in half-duplex. In a Peer-to-Peer configuration, two fibers are required between the two converters, one for data in each direction (RX and TX). To expand the number of connected serial devices, and extend transmission distance, the MC5001 can link to each other as a ring architechture in SFR (serial fiber ring) mode.