Moxa  Mfg Mini-Store

Unmanaged PoE Ethernet switch with 1 10/100BaseT(X) ports, 4 PoE 10/100BaseT(X) ports, and 1 100BaseFX single mode port with SC connector, 0 to 60°C

MOXA Major Lines
Mfg Part Number:  EDS-P206A-4PoE-S-SC  
Image may not reflect the actual item.
Price: $942.61 + Free Shipping
Quantity:
Status: Active
No Sales Tax except these states
, PO and Wire.

Certifications: EN 55032/EN 55024FCC Part 15BKCLVD(EN 60950-1)RoHSUL508

The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
  • 4 IEEE 802.3at compliant PoE and Ethernet combo ports
  • Up to 30 watts at 24/48 VDC per PoE port
  • Intelligent power consumption detection and classification
  • Redundant dual VDC power inputs
  • -40 to 75°C operating temperature range (T models)
Technology:
Standards IEEE 802.3at for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for Flow Control
Processing Type Store and Forward
Flow Control IEEE 802.3x flow control, back pressure flow control
Interface:
RJ45 Ports 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
Fiber Port(s) 100BaseFX ports (SC connector)
LED Indicators PWR1, PWR2, 10/100M, PoE
Physical Characteristics:
Housing Metal, IP30 protection
Dimensions 50 × 115 × 70 mm (1.96 x 4.52 x 2.76 in)
Installation DIN-Rail mounting, wall mounting (with optional kit)
Environmental Limits:
Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements:
Input Voltage 24/48 VDC
Input Current Max 7.5 A @ 24 VDC (supports up to 4 ports at 30 watts per PoE port)
Overload Current Protection Present
Connection 1 removable 4-contact terminal block
Reverse Polarity Protection Present
Regulatory Approvals
Safety UL508 (Pending)
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), level 3;
EN61000-4-3 (RS), level 3;
EN61000-4-4 (EFT), level 4;
EN61000-4-5 (Surge), level 4;
EN61000-4-6 (CS), level 3;
EN61000-4-8
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Warranty:
Warranty Period 5 years
Product Category
Product Category Unmanaged Switch
Mechanical
Dimensions: WxHxD (mm) 50.3mm x 115mm x 70mm
Mounting Din Rail
IP level IP30
Enclosure Metal
Data Rate and Number of Ports
Number of Ports 6
Fast Ethernet, 10/100 Mbps 1
Gigabit, 10/100/1000 Mbps -
Interface
Interface Type 10/100 Mbps RJ45, 10/100 Mbps RJ45 PoE, 100 Mbps Fiber
Fiber connector 1 Single-mode SC
PoE 4
M12 Connector -
SFP
Digital I/O/Relay -
Console -
Bypass -
Modular Design -
Available Modular -
Power
Power Input Type Dual DC/ DC Terminal Block
Operating Supply Voltage 24/48VDC
Power Consumption 7.5A @ 24VDC
Reliability
Operating Temperature 0C to 60C
Redundancy and Backup Options
Redundancy Technology Yes
STP/RSTP/PSTP/MSTP -
Automatic Backup Configurator Yes
Certification
Certification
UL 508 (Industrial Control)
EN 50155 (Rail Industry)
EN 50121-4 (Rail Industry)
EN 50121-3-2 (Rail Industry)
NEMA TS2 (ITS)
IEC 61850-3 (Power Industry)
IEEE 1613 (Power Industry)
IEEE 1588PTP (Power Industry)
DNV.GL (Marine)
ABS.LR.NK (Marine)
C1D2 (Oil & Gas)
ATEX (Oil & Gas)
Network Management and Control
Layer Level Switching L2
Modbus/TCP -
Ethernet/IP -
PROFINET -
SNMP/RMON -
LLDP -
DHCP -
IGMP Snooping/GMRP -
QoS -
VLAN 802.1Q -
IEEE 802.1X -
LACP (802.3ad)
Port Lock -
IPv6 -

Specification

Interface
Fiber Ports 100BaseFX ports (SC/ST connector)
LED Indicators PWR1, PWR2, 10/100M, PoE
PoE Pinout V-, V-, V+, V+ for pin 1, 2, 3, 6 (Endspan, MDI-X Alternative A)
RJ45 Ports 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
Power Requirements
Overload Current Protection Present
Reverse Polarity Protection Present
Input Voltage 24/48 (20 to 60 V) VDC, redundant inputs
Input Current Max 7.5 A @ 24 VDC (supports up to 4 ports at 30 watts per PoE port)
Connection 1 removable 4-contact terminal block
Technology
Standards IEEE 802.3af/at for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for Flow Control
Flow Control IEEE 802.3x flow control, back pressure flow control
Processing Type Store and Forward
Environmental Limits
Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
MTBF (mean time between failures)
Time 645,138 hrs
Database Telcordia (Bellcore), GB
Physical Characteristics
Weight 375 g
Dimensions 50.3 × 115 × 70 mm (1.98 x 4.53 x 2.76 in)
Installation DIN-Rail mounting, wall mounting (with optional kit)
Housing Metal, IP30 protection
Switch Properties
MAC Table Size 1 K
Packet Buffer Size 512 KB
Standards and Certifications
EMI FCC Part 15 Subpart B Class A, EN 55022 Class A
Safety UL 69050-1, UL 508
Note Please check Moxa’s website for the most up-to-date certification status.
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
EMS EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4, EN 61000-4-5 (Surge) Level 4,
EN 61000-4-6 (CS) Level 3, EN 61000-4-8
Freefall IEC 60068-2-32
Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty
[0] [True] [Yes] [No] [No]

nextwarehouse.com has a Shopper Approved rating of 4.6/5 based on 29302 ratings and reviews.