Moxa Mfg Mini-Store
CANbus to fiber converter, multi-mode, ST connector, 0 to 60°C
Product Page @ Moxa Site MOXA Major LinesMfg Part Number: ICF-1170I-M-ST , Item #: 936873
Image may not reflect the actual item.
Price: $491.14
Quantity:
In Stock: 4
In Stock: 4
No Sales Tax except these states
, PO and Wire.
The ICF-1170I series CANbus-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 KV optical isolation for the CANbus system and dual power inputs with alarm contact relay to ensure that your CANbus system will remain online.
- Transmits up to 2 km over optical fiber
- Converts CAN signals to fiber and fiber to CAN signals
- Baudrate up to 1 Mbps
- Dual power inputs for redundancy
- DIP switch for 120 Ω terminal resistance
- DIP switch for fiber test mode
- LEDs for Fiber TX, Fiber RX, Power 1, Power 2
- Wide temperature model available for -40 to 85°C environments
- Fully compatible with the ISO 11898 standard
| CAN Communication | |
| CANbus Interface | ISO 11898-2, Terminals (CAN_H, CAN_L,CAN_ GND) |
| Protocols | CAN 2.0A and 2.0B (ISO 11898-2) |
| Connector Type | 3-pin removable screw terminal x1 |
| Termination Resistor | Dip switch selector for 120 ? terminal resistor |
| Buadrate | Up to 1 Mbps |
| System Delay | 150 ns |
| Isolation Protection | 2 KV |
| Transmission Distance | Max 2 km (depends on the data rate and the protocol used) |
| LED Indicators | PWR1, PWR2, Fiber TX, Fiber RX |
| Note | The transmission distance is limited by the signal rate, as mentioned in the ISO 11898-2 standard |
| Fiber Communication | |
| Connector Type | ST (multi-mode) fiber ports x 2 |
| Support Cable | 50/125, 62.5/125, or 100/140 ?m (multi-mode) |
| Wavelength | 850 nm |
| Tx Output | Multi-mode (> -5 dBm) |
| RX Sensitivity | Multi-mode (-20 dBm) |
| Physical Characteristics | |
| Housing | Aluminum (1 mm) |
| Dimensions | 30.3 x 70 x 115 mm (11.9x27.6x45.3 in) |
| Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Operating Humidity | 5 to 95% RH |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Power Requirements | |
| Input Voltage | 12 to 48 VDC dual power inputs for redundant power |
| Power Consumption | ICF-1170I: 221 mA @ 12 V Alarm Contact: 1 relay output with current carrying of 1 A @ 24 VDC |
| Voltage Reversal Protection | Protects against V+/V- reversal |
| Over Current Protection | 1.1 A (protects against two signals shorted together) |
| Regulatory Approvals | |
| EMI | EN55022 1998, Class A |
| EMS | EN61000-4-2 (ESD), Criteria B, Level 4 EN61000-4-3 (RS), Criteria A, Level 2 EN61000-4-4 (EFT), Criteria B, Level 4 EN61000-4-5 (Surge), Criteria B, Level 2 EN61000-4-6 (CS), Criteria B, Level 2 En61000-4-8 (PFMF), Criteria A, Level 3 |
| UL/CUL | UL-508 |
| TUV | EN 60950-1 |
| CE | Class A |
| FCC | Part 15 sub Class A |
| Freefall | IEC 60068-2-32 |
| MTBF | 792085 hrs |
| Warranty | |
| Warranty Period | 5 years |
Specification
| Power Requirements | |
| Power Consumption | ICF-1170I: 221 mA @ 12 V Alarm Contact: 1 relay output with current carrying of 1 A @ 24 VDC |
| Input Voltage | 12 to 48 VDC dual power inputs for redundant power |
| Voltage Reversal Protection | Protects against V+/V- reversal |
| Over Current Protection | 1.1 A (protects against two signals shorted together) |
| Fiber Communication | |
| Wavelength | 850 nm |
| Rx Sensitivity | Multi-mode (-20 dBm) |
| Connector Type | ST (multi-mode) fiber ports |
| TX Output | Multi-mode (> -5 dBm) |
| Support Cable | 50/125, 62.5/125, or 100/140 μm (multi-mode) |
| Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| MTBF (mean time between failures) | |
| Time | 792,085 hrs |
| Database | Telcordia (Bellcore), GB |
| CAN Communication | |
| Note | The transmission distance is limited by the signal rate, as indicated in the ISO 11898-2 standard. |
| Transfer Rate | Up to 1 Mbps |
| Protocols | CAN 2.0A and 2.0B (ISO 11898-2) |
| Isolation Protection | 2 KV |
| Transmission Distance | Max 2 km (depends on the data rate and the protocol used) |
| System Delay | 150 ns |
| Connector Type | 3-pin removable screw terminal x1 |
| ESD Protection | Supports 15 KV |
| LED Indicators | PWR1, PWR2, Fiber TX, Fiber RX |
| CAN Interface | ISO 11898-2, Terminals (CAN_H, CAN_L,CAN_GND) |
| Termination Resistor | Dip switch selector for 120 Ω terminal resistor |
| Physical Characteristics | |
| Weight | Product only: 175 g (0.39 lb) Packaged: 320 g (0.71 lb) |
| Dimensions | 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in) |
| Housing | Aluminum (1 mm) |
| Standards and Certifications | |
| EMI | EN 55022 Class A, FCC Part 15 Subpart B Class A |
| Safety | UL 508, EN 60950-1 |
| EMS | EN 61000-4-2 (ESD) Level 4, EN 61000-4-3 (RS) Level 2, EN 61000-4-4 (EFT) Level 4, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 2, EN 61000-4-8 (PFMF) Level 3 |
| EMC | CE, FCC |
| Freefall | IEC 60068-2-32 |
| Green Product | RoHS, CRoHS, WEEE |
| Warranty | |
| Warranty Period | 5 years |
| Details | See http://www.moxa.com/support/warranty.htm |
If you need accessory information for this product, please use our Online Contact Us Form to reach us, our industrial sales team is here to help you find the accessories.
