IDS-5042 is an innovative 4 port RS232/422/485 to 2 ports LAN redundant device server. To assure the agility and security of critical data, IDS-5042 offers many powerful features for HW & SW redundant functions. When the connection between master-link and LAN fails, IDS-5042 can automatically switch to another LAN port within 10mS, and still guarantees a non-stop connection. IDS-5042 also supports switch mode, users can use Daisy Chain to reduce the usage of Ethernet switch ports. Secondly, IDS-5042 can simultaneously transfer data into 5 host PCs. This feature can assure all critical data that saved in different host PC to avoid Ethernet break or host PCs failure. Thirdly, IDS-5042 provides dual redundant power inputs on DC power jack and terminal block. IDS-5042 also provides NAT pass through function so that users are able to manage IDS-5042 inside or outside the NAT router. It is easy for different IP domain users to use IDS-5042. In addition, IDS-5042+ also support P.O.E. PD on ETH2. This feature is fully compliant with IEEE802.3af standard. Therefore, IDS-5042 is one of the best communication redundant solutions for application of serial devices.

Features

• Dual redundant Ethernet port support redundant mode (Recovery time < 10ms)
• Ethernet switch mode enable Daisy Chain
• Redundant 5 multiple host devices supported to protect your industrial network
• Versatile modes & event alarm by e-mail
• HTTPs & SSH protocol supported for secured management
• NAT router pass through
• IP table to prevent access from unauthorized IP address
• Configurable by Web-based and Windows utility (DS-Tool)
• 1KV isolation for PoE PD port of IDS-5042+
• Dual redundant DC power inputs of terminal block
• Rigid IP-30 housing design
• DIN-Rail and panel mounting enabled

Specifications

ORing Device Server Model	IDS-5042	IDS-5042+
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX	2
P.O.E. Feature		P.O.E.Present at ETH2 Power Device (IEEE 802.3af): IEEE 802.3af compliant input interface Power consumption: 8Watts max. Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min
Serial Ports
Connector	DB9 x 4
Operation Mode	RS232 / RS422 / 4(2)-Wire RS485. Which can be configured by DS-Tool
Serial Baud Rate	110 bps to 460.8 Kbps
Data Bits	5, 6, 7, 8
Parity	odd, even, none, mark, space
Stop Bits	1, 1.5, 2
RS-232	TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422	Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire)	Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire)	Data+, Data-,GND
Flow Control	XON/XOFF, RTS/CTS, DTR/DSR
LED indicators
Power indicator	PWR 1(2) / Ready: Red On: Power is on and booting up. Red Blinking: Indicates an IP conflict, or DHCP or BOOTP server did not respond properly. Green On: Power is on and functioning Normally. Green Blinking: Located by Administrator.
10/100TX RJ45 port indicator	Green for port Link/Act at 100Mbps. Yellow for port Link/Act at 10Mbps.
Serial TX / RX LEDs:	Red: Serial port is receiving data Green: Serial port is transmitting data
Power
Redundant Input power	Dual DC inputs. 12-48VDC on 6-pin terminal block
Power consumption (Typ.)	5.5 Watts
Overload current protection	Present
Reverse polarity protection	Present on terminal block
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	52(W)x106(D)x144(H) mm (2.05x4.17x5.67 inch.)
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-10 to 60°C (14 to 140°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950
Warranty	5 years

Mechanical
Dimensions: WxHxD (mm)	52 x 144 x 106
Mounting	Din Rail Mount; Wall Mount
Enclosure	Metal
Interface
Serial interface	RS232/RS422/RS485
Serial interface number of ports	4
Serial Interface type of connector	DB9
Network interface	2 Port Ethernet RJ45 Connector
Network interface number of ports	2
Network interface type of connector	RJ45
Power
Power Input Type	Dual DC/DC / Terminal Block
Operating Supply Voltage	12 to 48 VDC
Power Consumption	5.5W
Reliability
Operating Temperature	-40 to 85C
Isolation Protection	-
Surge Protection	-
Standards and Certifications	-

If you need accessory information for this product, please use our Online Contact Us Form to reach us, our industrial sales team is here to help you find the accessories.

Download DataSheet