| Main System: |
| -
Integrated 4 ARGO SE402 (48MHz 16 bits RISC Processor) |
| - USB 1.1 Host Controller (compatible with USB 2.0) |
| - USB
Audio Device Class 1.0 |
| - USB HID
Class 1.0 |
| - Audio:
16-bit mono linear PCM audio in 8 KHz sampling rate |
| PC
Interface: 1 USB Port (Type B Connector) for PC connection |
| Telephone
Interface: 4 or 8 FXO Ports (RJ11 Modular) for PBX analog FXS extension
ports (depending on model); The PBX should support "hunt group" feature
on the Extension (FXS) ports. |
| PBXes
Supported: Works wiyh most PBXes |
| Power
Consumption: 4.5 ~5.5 V DC per port, supplied though the USB port ;
Operating Current: Typical 130 mA per port, Peak (Ringing at 2 REN) 400
mA per port |
| FXO Port:
Support Auto Attendant (Tone or Voice Greeting); PSTN/FXS Polarity
Reversal Detection; Provides busy tone detection of PBX Extension port,
as well as two more PSTN lines; Auto Gain Control; Call Progress
Generation/Detection: Dial Tone, Busy Tone, Ring Back Tone, Ringing
Cadence Tone; LEC (Line Echo Cancellation): Support in Software layer
(Filter Driver); Full Duplex Voice Channel: Support; Inbound/Outbound
DTMF Relay; Caller ID (FSK Type 1, DTMF Detection/Generation) |
| Cetifications
and compliance: CE; FCC: Part 15B, Class B; DGT; JATE; MIC; CCC; IC |
| Warranty:1
year |
