Special Note: Jun 06, 2017
Do you need cables? See the accessories list or call us for help.
NPort 5600-8-DT device servers can conveniently and transparently connect 8 serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network.
The NPort 5600-8-DT series is the best choice for applications that
need additional serial ports, but for which mounting rails are not
available. The NPort 5600-8-DT device servers have a smaller form
factor compared to our 19" models.
Convenient design for RS-485 applications
The NPort 5650-8-DT device servers support selectable 1 K? and 150 K?
pull high/low resistors and a 120? terminator. In some critical
environments, termination resistors may be needed to prevent the
reflection of serial signals. When using termination resistors, it is
also important to set the pull high/low resistors correctly so that the
electrical signal is not corrupted. Since no set of resistor values is
universally compatible with all environments, NPort 5600-8-DT device
servers use DIP switches to allow users to adjust termination and pull
high/low resistor values manually for each serial port.
Convenient power inputs
The NPort 5650-8-DT device servers support both a power terminal block
and power jack for ease of use and greater flexibility. Users can
connect the terminal block directly to a DC power source, or use the
power jack to connect to an AC circuit through an adaptor.
Features:
Specifications
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
|
Mechanical | |
Dimensions: WxHxD (mm) | 229 x 46 x 125 |
Mounting | Wall Mount |
Enclosure | Metal |
Interface | |
Serial interface | RS232 |
Serial interface number of ports | 8 |
Serial Interface type of connector | DB9 |
Network interface | 1 Port Ethernet RJ45 Connector |
Network interface number of ports | 1 |
Network interface type of connector | RJ45 |
Power | |
Power Input Type | Single DC / Jack |
Operating Supply Voltage | 12 to 48 VDC |
Power Consumption | 611 mA @ 12V |
Reliability | |
Operating Temperature | 0 to 60C |
Isolation Protection | - |
Surge Protection | - |
Standards and Certifications | Safety UL 60950-1, EN 60950-1, EMC CE, FCC, EMI EN 55022 Class A, FCC Part 15 Subpart B Class A, EMS EN 55024 |
Power Requirements | |
Power Consumption | NPort 5610-8-DT: 611 mA @ 12 V, 300 mA @ 24 V, 140 mA @ 48 V NPort 5610-8-DT-J: 611 mA @ 12 V, 300 mA @ 24 V, 140 mA @ 48 V NPort 5650-8-DT: 615 mA @ 12 V, 300 mA @ 24 V, 156 mA @ 48 V NPort 5650I-8-DT: 1066 mA @ 12 V, 510 mA @ 24 V, 200 mA @ 48 V NPort 5650-8-DT-J: 615 mA @ 12 V, 300 mA @ 24 V, 156 mA @ 48 V |
Input Voltage | 12 to 48 VDC |
Software | |
Linux Real TTY Drivers | Linux kernel 2.4.x, 2.6.x |
Configuration Options | Web Console, Telnet Console, Serial Console, Windows Utility |
Windows Real COM Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded |
Network Protocols | ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP, RFC2217 |
Fixed TTY Drivers | SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i |
Serial Communication Parameters | |
Flow Control | DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF |
Data Bits | 5, 6, 7, 8 |
Parity | None, Even, Odd, Space, Mark |
Stop Bits | 1, 1.5, 2 |
Baudrate | 50 bps to 921.6 Kbps |
Ethernet Interface | |
Connector | 8-pin RJ45 |
Speed | 10/100 Mbps, auto MDI/MDIX |
Magnetic Isolation Protection | 1.5 KV built-in |
Number of Ports | 2 (1 IP) |
Environmental Limits | |
Operating Temperature | 0 to 55°C (32 to 131°F) |
Storage Temperature | -20 to 70°C (-4 to 158°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Mini Screen with Push Buttons | |
Push Buttons | Four push buttons for convenient on-site configuration |
LCD Panel | Liquid Crystal Display on the case |
Physical Characteristics | |
Weight | NPort 5610-8-DT: 1760 g NPort 5610-8-DT-J: 1710 g NPort 5650-8-DT: 1770 g NPort 5650-8-DT-J: 1710 g NPort 5650I-8-DT: 1850 g |
Dimensions | Without ears: 197 x 44 x 125 mm (7.76 x 1.73 x 4.92 in) With ears: 229 x 46 x 125 mm (9.01 x 1.81 x 4.92 in) With DIN-Rail kit on bottom panel: 197 x 53 x 125 mm (7.76 x 2.09 x 4.92 in) |
Housing | Metal, IP30 protection |
Serial Interface | |
Connector | NPort 5610-8-DT/5650-8-DT/5650I-8-DT: DB9 male NPort 5610-8-DT-J/5650-8-DT-J: RJ45 (8 pins) |
Serial Standards | NPort 5610-8-DT: RS-232 NPort 5650-8-DT: RS-232/422/485 |
RS-485 Data Direction Control | ADDC® (automatic data direction control) |
Number of Ports | 8 |
Pull High/Low Resistor for RS-485 | 1 KΩ, 150 KΩ |
Terminator for RS-485 | 120 Ω |
Serial Line Protection | 15 KV ESD protection for all signals 2 KV isolation protection (NPort 5650I-8-DT only) |
Reliability | |
Alert Tools | Built-in buzzer and RTC (real-time clock) |
MTBF (mean time between failures) | 163,356 hrs |
Automatic Reboot Trigger | Built-in WDT (watchdog timer) |
Serial Signals | |
RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-2w | Data+, Data-, GND |
RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
Standards and Certifications | |
EMI | EN 55022 Class A, FCC Part 15 Subpart B Class A |
Safety | UL 60950-1, EN 60950-1 |
EMS | EN 55024 |
EMC | CE, FCC |
Warranty | |
Warranty Period | 5 years |
Details | See http://www.moxa.com/support/warranty.htm |