Introduction
|
NE-4110S
NE-4110S offers a complete Ethernet connection solution (TCP
Server,
TCP Client, UDP) to network-enable your serial devices—only 57 x 40 mm,
or less than half the size of your credit card—you can easily integrate
NE-4110S into your serial device to make the device 10/100M
Ethernet-ready.
Industrial-proven, built-in TCP/IP stack
NE-4110S's
industrial-proven, built-in TCP/IP stack makes it easy for your R&D
engineers to network-enable your serial device since they won't need to
put a lot of effort into TCP/IP programming. The 10/100M Ethernet
auto-sensing interface lets you enjoy the higher 100M speed when
available. In addition, NE-4110S's 4 GPIO pins provide ample design
flexibility, giving you the freedom to develop the features your
customers need. The NE-4110S 5V design is better suited for today's
equipment, and R&D engineers can spend less effort implementing the
power circuit.
User-friendly configuration options
Configuration
is done with a user-friendly Windows utility, Web browser, telnet
console, or serial console. In addition, a Windows-based NECI (Network
Enabler Configuration Interface) Library is available to help you
develop your own Windows utilities.
Shorter time to market
The ready to go design of
NE-4110S allows you to get your legacy serial device Ethernet-ready
easily without modifying the circuit, and get your product to market in
no time.
NE-4110-ST Starter Kit
An NE-4110-ST Starter Kit
that includes everything you need to develop your application is also
available. The Starter Kit includes an evaluation board, SDK,
documentation, cables, and accessories.
Applications
Industrial Automation (PLC,
metering devices)
Medical/Healthcare (ECG, ultrasonic monitoring, blood
testing devices)
Building Automation (HVAC, fire alarms)
Security/Surveillance (card readers, biometric
identification devices)
Information Appliances (UPS monitor modules)
|
Much smaller than
a credit card
NE-4110S System
Block Diagram
NE-4110S Schematic
Pin Assignments
|
|
Features
|
- RS-232 to 10/100M auto-sensing Ethernet mini card for
embedded device networking
- Compact size (57 x 40 mm)
- Ready-to-use TCP/IP firmware for fast integration
- TCP Server, TCP Client, UDP, Real COM driver operation modes
- Easy configuration with Web browser, serial console, or
Windows utility
- Low power consumption (1.5W)
- Dedicated 4 GPIO for user's configuration
- Programmable version available
|
Specifications
|
LAN |
|
|
Auto-detecting 10/100 Mbps |
|
|
|
Built-in transformer with 1.5 KV magnetic isolation |
|
|
|
|
|
|
Serial
Interface |
|
|
|
|
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
|
|
|
|
Serial
Communication Parameters |
|
|
None, Even, Odd, Space, Mark |
|
|
|
|
|
|
|
|
|
|
|
|
GPIO |
|
|
Software
Features |
|
|
ICMP, ARP, IP, TCP, UDP, DHCP, Telnet, HTTP, SNMP, SMTP |
|
|
|
TCP Server, TCP Client, UDP, Real COM |
|
|
|
Administration utility for Windows 95/98/ME/NT/2000/XP |
|
|
|
Web browser, serial console, Telnet console, or Windows
utility |
|
|
|
NECI library for developing your own utility |
|
|
|
|
Power
Requirements |
|
|
Environmental |
|
|
0 to 70°C (32 to 158°F), 5 to 95% RH |
|
|
|
-20 to 85°C (-4 to 185°F), 5 to 95% RH |
|
|
|
|
Regulatory
Approvals |
|
|
Manufacture
Warranty |
|
|
Standard Moxa Product Warranty |
|
|
|
|
|
Ordering Information
|
|
10/100
Mbps Ethernet Network Enabler for RS-232 Devices, with RJ45 Ethernet
connector |
|
|
Serial
Command Mode Version of NE-4110S, 100 Mbps Ethernet Network Enabler for
RS-232 Devices, with RJ45 Ethernet connector |
|
|
Starter
Kit for NE-4110S, NE-4110S-P, NE-4110S-CMD; package includes:
NE-4110-ST evaluation board
Documentation & Software CD;
includes NE utility, SDK, and User's Manual
NE-4100 Series Quick Installation
Guide (printed)
Universal Power Adaptor
2 Power Cords
Ethernet Cross-Over Cable
Null Modem Serial Cable
MOXA 5-Year Warranty Booklet
*NOTE: The NE module must be purchased separately. |
|
|
|
|