With UPSMON PLUS Manager, power-monitoring software, Smart King is able
to support the remote monitor of UPS, so that users can keep up with
each UPS and the operation of the host (Up to 1500 UPSes and thousands
of hosts at the time) anytime, anywhere. In addition to the management
by visual maps of UPSMON PLUS Manager, Smart King also supports HP
Openview for the administration of remote system.
Here is a successful case for PCM global system of power management.
Currently, inside Turkey, there are 1228 serial products of Smart King,
wireless UPS of Ultimate series, and over 5000 hosts, and all of them
are monitored via the Internet at the same time. This is the
realization of remote system of power management and protection of
automatic stop when no one is in the office.
GENERAL INFORMATION
Model Type SMART KING
Model Name SMK-1000A
AC INPUT
AC Input Capacity on Battery 1000VA
AC Input Voltage (+/-) 25% at line input
AC Input Frequency 50 or 60 Hz+/-5% (auto sensing)
AC OUTPUT
AC Output Voltage Pure sine wave at +/-5% of
nominal, -10% of nominal after low battery warning
AC Output Frequency 50 or 60 Hz +/- 0.5%
AC Output Voltage Regulation AVR automatically
increase output voltage 15% above input voltage if -9% to -25% of
nominal. AVR decrease output voltage 15% below input voltage if +9% to
+25% of nominal
PROTECTION
Protection Spike 320 Joules, 2ms
Protection EMI/RFI 10dB at 0.15 MHz, 50 dB at 30 MHz
Protection Overload UPS automatic shutdown if
overload exceeds 110% nominal at 20 sec and 125% at 5 sec
Protection Unit Fuse for 110V models (600VA~2500VA)
and 220V models (under 1250VA), breaker for 110V model (3000VA) and
220V models (above 1500VA)
Protection Transfer Time 2/4 milliseconds (typical),
including detection time
Protection Short Protection UPS output cut off
immediately or input fuse( or breaker) protection
BATTERY
Battery Type Hot swappable, sealed, maintenance-free
lead acid, with 3 - 6 year lifetime
Battery Typical 4 hours (to 90% of full capacity)
Battery Protection Automatic self-test &
discharge protection, replace battery indicator
Battery Run Time ~ 65 minutes
PHYSICAL
Physical Weight kgs Tower 15
Physical Weight lbs Tower (33.0lb)
Physical Weight lbs RM N/A
Physical Dimension mm Tower 140x436x210
Physical Dimension inch Tower 5.5x17.2x8.3
INDICATOR
LCD Indicators Status Indicate line, bypass, inv,
backup, fault, bat capacity, load capacity, I/P frequency, O/P voltage,
O/P frequency, inside temperature, fault status, load
LED LED
ALARM
Alarm Battery Backup Slow beeping sound (about 0.25
Hz)
Alarm Battery Low Rapid beeping sound (about 1.00Hz)
Alarm Overload Continue beeping sound
INTERFACE
Interface Dry Contact Sends AC fail and battery low
signals, and receives shutdown signal from computer
Interface RS-232 Detect battery low, Schedule UPS
on/off, AC input/output power status display
Interface Option Novell, SNMP, Windows NT, Window
95/98/2000/ME/XP
ENVIRONMENT
Environment Ambient 3,500 meters max. elevation,
0-95% humidity non-condensing, 0-48 deg c
Environment Audible <40dBA (1 meter from surface)
Environment Storage Condition 15,000 meters max.
elevation
ShowOrder 30