Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa's leading-edge surge immunity solution, which is applied to the NPort P5150A's serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.
The NPort P5150A's 3-step web-based configuration tool is straightforward and user-friendly. The NPort P5150A's web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort settings and enable the application, saving a great amount of time and effort.
NPort P5150A device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an e-mail alert can be sent instead. Users can define the trigger for the alerts using Moxa's Windows utility, or the web console. For example, alerts can be triggered by a warm start, a cold start, or a password change.
|Dimensions: WxHxD (mm)
|75 x 80 x 22
|Din Rail Mount; Wall Mount
|Serial interface number of ports
|Serial Interface type of connector
|1 Port Ethernet PoE Connector
|Network interface number of ports
|Network interface type of connector
|Power Input Type
|Single DC / Jack
|Operating Supply Voltage
|12 to 48 VDC
|120 mA @ 12V
|0 to 60C
|Standards and Certifications
|Safety UL 60950-1, EN 60950-1, EMC CE, FCC, EMI EN 55022 Class A, FCC Part 15 Subpart B Class A, EMS EN 55024, Power Line Protection EN 61000-4-4(EFT) Level 2, EN 61000-4-5(Surge) Level 3